Leave a Reply

Your email address will not be published. Required fields are marked *

  • Diffused Silicon Micro Pressure Sensor
  • Diffused Silicon Micro Pressure Sensor
  • Diffused Silicon Micro Pressure Sensor

TYPE:JC-CW02

NAME:JC-CW02 Diffused Silicon Micro Pressure Sensor (0~30kPa)

JC-CW02 diffused silicon micro pressure sensor core adopts Φ19mm standard outer diameter. The micro-pressure core is the core component of producing the pressure sensor and pressure transmitter.

JC-CW02 Diffused Silicon Micro Pressure Sensor Overview:

JC-CW02 diffused silicon micro pressure sensor core adopts Φ19mm standard outer diameter. The micro-pressure core is the core component of producing the pressure sensor and pressure transmitter. As a small-range and high-performance pressure sensitive component, it can be easily amplified and assembled into a standard signal output transmitter.

JC-CW02 diffused silicon pressure sensor is a packaged diffusion silicon pressure sensitive chip packaged in a 316L stainless steel case. The back of the sensitive chip is pressed and the core back passivation process is applied. Therefore, the product can be used not only to measure clean and non-corrosive gases but also to measure non-corrosive and non-conductive liquid. O-ring side piston pressure seals for easy installation.

Diffused Silicon Pressure Sensor Features:

* Constant current
* High reliability pressure chip
* Compensating plate filling, excellent moisture resistance
* 316L SS material
* High versatility and high sensitivity
* 19mm Standard OEM

Diffused Silicon Pressure Sensor Applications:

* Pressure measuring instrument
* Pressure calibration instrument
* Industrial Process Control
* Refrigeration equipment & HVAC control
* Biomedical instruments
* Gas pressure measurement

Dimensions(mm)

JC-CW02 Diffused Silicon Micro Pressure Sensor

Specifications Condition Min. Typical Max.
Non-linear %FS -0.2 ±0.3 0.4
Hysteresis %FS -0.05 ±0.03 -0.05
Repeatability %FS -0.05 ±0.03 0.05
Zero Output mV -2 ±1 2
Span Output mV 1kPa 20 25 40
5kPa 20 30 45
20kPa 60 100 150
35kPa 30 40 60
70kPa
Other range 30 40 60
Zero Temperature drift %FS ±0.75 ±1
Sensitivity temperature drift %FS ±0.75 ±1
Thermal hysteresis %FS ±0.1
Long term Stability %FS/year ±0.2 0.3

 

Pressure Range -100kPa~0~1kPa…100kPa
Pressure Type Gauge
Excitation 1.5mA
Input resistance 2kΩ~5kΩ
Electrical connection Silicone flexible wires
Compensation temperature 0℃~50℃
Working Temperature -20℃~85℃
Storage Temperature -20℃~85℃
Insulation resistance ≥200MΩ/250VDC
Response time ≤1ms(up to 90%FS)
Measuring medium Clean, non-corrosive liquid and gas
Mechanical vibration 20g(20~5000HZ)
Impact 100g(10ms)
Service life 10×106(cycles)
Housing material 316L SS
Seal ring Butane or Fluororubber
Overload Pressure 300%FS
Burst Pressure 500%FS
JC-CW02
Code Description
JC-CW02 Diffused silicon micro pressure sensor
Code Power Supply
C Constant Current
V Constant Voltage
Code Pressure Range
1k 0~1kPa        Optional equal range in negative pressure
2k 0~2kPa        Optional equal range in negative pressure
5k 0~5kPa        Optional equal range in negative pressure
7k 0~7kPa        Optional equal range in negative pressure
10k 0~10kPa      Optional equal range in negative pressure
±1k -1kPa~1kPa
±2k -2kPa~2kPa
±5k -5kPa~5kPa
±7k -7kPa~7kPa
±10k -10kPa~10kPa
XX Customized
Code Pressure Type
G Gauge
Code Wire Lead
2 Silicone wire
X Customized

Note:
1. The least squares method fits the straight line.
2. Compared with the output of 25 °C in the compensation temperature range.
3. Can be used for over-range or down-range, and the amplitude is controlled within ±50%FS.
4. The maximum pressure of the system should be less than the overload protection limit of the sensor, otherwise it will affect the service life of the product and damage the product.
5. The commonly used compensation method for products is 1.5mA constant current compensation.
6. Do not force to pull the pins or the leads of sensitive components.
7. Protect the isolation diaphragm at the front end of the pressure sensitive component to prevent the impact of the pressure sensitive component from damaging the sensitive component.
8. If you have special requirements on product performance parameters and functions, please contact us.

More complete pressure sensor HD video from YouTube

Leave a Reply

Your email address will not be published. Required fields are marked *